Tag Archives: Tools

Pinterest Project: Storage Baskets

Posted on by

0

I have a very tiny condo. When I say tiny, I mean itty bitty — 425 square feet. For all those New Yorker’s out there that may seem large, but for me, it’s small. So I’ve had to be creative with storage. One thing that’s great about my place is that it has very tall ceilings, so I’ve been able to utilize the vertical space.

I was super excited when I found this storage idea on Pinterest.

Basket Storage

From "I'm Busy Procrastinating"

I had been storing extra towels under my bed and I wanted to use that space for my crafting supplies. My mom was in town for a weekend and so we tackled this project. I should warn you, I make simple tasks very hard and this project was no different. Below is a the saga of the basket storage…

First, I bought three nesting baskets at Christmas Tree Shop. For those who haven’t experienced the Christmas Tree Shop experience, well all I can say is it’s an experience. It’s not Christmas supplies as one would expect by the name, but more like a discount home goods store.

When my mom got into town, I sent her with a basket to the hardware store to find the best way to hang them. She decided on whatever these are in the picture below, after ruling out picture hangers and decorative hooks.

Thing-a-ma-jig

Thing-a-ma-jig

I had originally thought I would put thee baskets over my toilet and quickly realized that was not going to happen — I would have hit my head on the bottom basket. So I had to put them on the only other available wall space in my bathroom, where I currently had decorative shelves. (Hence why this turned into a saga rather than a simple project.)

The shelves were secured with mollies/wall anchors, so I needed to take those out and repair the holes. I did have a stroke of genius at this point, and determined my baskets’ locations based on being able to use the wall anchors already in the wall. I now also needed to hang the shelves over toilet, which meant putting in more wall anchors there.

(Helpful Hint: When ever hanging something that will have weight on it and be jostled, it’s best to use mollies or wall anchors. I usually buy the kind that can be screwed in or out since they are the easiest to remove. There are also ones that you can just hammer in.)

Walls

Prepping the Walls

So after I filled in the holes and repainted, I went to work putting in the rest of the wall anchors. This is what took me so long. I’m in a bathroom, and what’s in the walls of a bathroom? Pipes. Don’t worry, I didn’t go through one. I might just have tapped them a bit. I had marked where I wanted the shelves and baskets to go, and started drilling and hammering and hit tapped a few pipes. This meant re-patching holes and changing my locations.

After doing this a few times, my AMAZING mother had a brilliant idea! SHORTER ANCHORS! Why didn’t we think of this before all the spackling! So after about a day and half of wall repairing, we finally finished!

Finished Product

Yeah! Bathroom storage!

Now I just need more towels…

Handy How-To: Installing a Cable Cord

Posted on by

0

I’m admittedly not a handy person, but I live alone and so need to do some basics. These might be easy for most people, but I figured there are others out there like me. My latest project was to replace my cable cord that was conveniently stapled along the baseboard. This was done when the cable was installed, very easily by the amazing Verizon Fios rep — he even helped me pick out paint colors! Talk about full service.

So why am I having to replace the cord? No, I didn’t move my TV. I came home one day from work and found that my puppy Gatsby had chewed on the baseboard, pulled out the cable (including some of the staples), and then chewed on the cable itself.

Chewed Cable

After checking his mouth for cuts, I looked to see if the cable was still working. Thankfully — for Gatsby — it did. So I covered the cord with a towel and proceeded over the next week to collect supplies.

Step 1: Assemble supplies.

Wine Supplies

OOOoops… I mean these supplies:

Cable Install Supplies

Cable Install Supplies
Shown here: hammer, needle-nose pliers, 50-ft. cable cord, and cable clips.

When I went to the hardware store I was looking for a staple gun and brought one of the plastic covered staples as an example of what I wanted. After talking to a few of the  people there, I selected the cable clips that could be hammered in. (I had used a staple gun  before — a whole other story — and really didn’t have enough hand strength to get the staples in correctly).

Step 2: Remove staples

Plastic Covered Staples

Picture of the how the cord was installed by Verizon with plastic covered staples.

I used the needle nose pliers to pull out the staples.

Step 3: Wipe down baseboard.

There was a lot of dust collected under the cord, so I took the opportunity to clean everything with a damp cloth.

Step 4: Hammer down clips.

Final Cable

I started on one end, clipped on the cable clips and hammered them into the top of the baseboard. The direction on the box showed to hammer the cord to the side, but I wanted to cover the staple holes.* I found it easiest to pull the cord on the loose side while hammering the clip down from the side (that way you are less likely to hit the wall).

Helpful Hints

1. Drink the wine after you’re done using the hammer.

2. Repair any damages to the baseboard before you install the cord. I didn’t have the supplies to repair where Gatsby ate the baseboard, so didn’t do this. I will have to remove a few of the clips to do this in the future. Also, I didn’t fill in the staples holes. If I did this over again, I think just a little paint would cover them up.*

3. MAKE SURE THE CABLE CORD IS LONG ENOUGH! I had a cord leftover from a previous apartment and had planned to use it. Thankfully last minute I tested to see if it was long enough. I wasn’t. What I didn’t do was measure how long that cord was or what length I needed. I guesstimated it was 20-ft. long. I bought a 50-ft. cord. I originally had a 25-ft. cord in my cart, but was worried enough that it might not be long enough that I got the next size up. I figured it didn’t hurt to have the extra wound up behind my TV stand.

4. Be ready to make “other” repairs. I hit the wall a couple times and took off a bit of paint, so I need to touch that up.

I’m writing this post while watching the TV, which seems a bit clear now that the copper cord isn’t exposed!

UPDATE: At 8:31 am the next morning, I heard an interesting sound from the living room. I caught Gatsby in the act!!! He was going after the new cord – the little shit! I thankfully had bought a new bone that said it was for “powerful chewers” and it was bacon flavored–yummmmm. So I got that out and so far it’s distracted him. I  sprayed the new cord down with Bitter Apple. Hopefully one of these days I can write a “How-To” for stopping your dog from chewing!